Citizen Participation, Public Policy, and Social Change Assignment

Citizen Participation, Public Policy, and Social Change - Assignment Example America society conforms to the views of functionalist theories by critically examining functions of human behavior as a platform for initiating social change (Bishop et al., 2009). It is common that most people tend to resist change. From PoliceCentral simulation, it is explicit that resistance to change is one of the obstacles that any group encounters when attempting to initiate social change in the society. This behavior is often closely connected to cultural, economic and technological factors. People would prefer to maintain status quo. Absence of relevant information is another obstacle that has impacted negatively on initiation of social change in the society. People should have right information about the social change that is about to take effect to enable them understand the need for it. Initiation of social change is also undermined by societal norms and expectations, some of which support entrenched social behaviors. Public policies also impacts initiation of social change (Bishop et al., 2009). From the simulation, it is explicit that anyone attempting to effect social change encounters a great deal of challenges. Resistance to change in the modern societies particularly in the United States of America remains predictably strong. Therefore, it is important to have full knowledge of the ways of handling these obstacles. Effective communication should be embraced when initiating social change. The need for the change should be addressed adequately. The group effecting change must consider public policies before attempting to effect social change (Bishop et al., 2009). It is also important to allow all citizens to be affected by change to involve themselves in the process of initiating social change. Bishop, B. J., Vicary, D. A., Browne, A. L., & Guard, N. (2009). Public policy, participation and the third position: The implication of engaging communities on their own terms.

Application Of Microcontroller In Instrumentation Information Technology Essay

Application Of Microcontroller In Instrumentation Information Technology Essay A  microcontroller  is a small computer on a single  integrated circuit  consisting internally of a relatively simple CPU,  clock, timers, I/O ports, and memory. Program memory in form of   NOR flash  or   ROM  is also often included on chip, as well as a typically small amount of RAM. Microcontrollers are designed for small or dedicated applications. Thus, in contrast to the  microprocessors  used in   personal computers  and other high-performance or general purpose applications, simplicity is emphasized. Some microcontrollers may use four-bit words and operate at  clock rate  frequencies as low as 4  kHz as this is adequate for many typical applications, enabling low power consumption. They will generally have the ability to retain functionality while waiting for an event such as a button press or other interrupt; power consumption while sleeping (CPU clock and most peripherals off) may be just nano watts, making many of them well suited for long la sting battery applications. Microcontrollers are used in automatically controlled products and devices, such as automobile engine control systems, implantable medical devices, remote controls, office machines, appliances, power tools, and toys. By reducing the size and cost compared to a design that uses a separate microprocessor, memory, and input/output devices, microcontrollers make it economical to digitally control even more devices and processes. Mixed signal microcontrollers are common, integrating analog components needed to control non-digital electronic systems. INTRODUCTION Embedded design A microcontroller can be considered a self-contained system with a processor, memory and peripherals and can be used with an  embedded system.  The majority of microcontrollers in use today are embedded in other machinery, such as automobiles, telephones, appliances, and peripherals for computer systems. These are called  embedded systems. While some embedded systems are very sophisticated, many have minimal requirements for memory and program length, with no operating system, and low software complexity. Programs Microcontroller programs must fit in the available on-chip program memory, since it would be costly to provide a system with external, expandable, memory. Compilers and assembler are used to turn high-level language and assembler language codes into a compact  machine code  for storage in the microcontrollers memory. Depending on the device, the program memory may be permanent, read-only memory that can only be programmed at the factory, or program memory may be field-alterable flash or erasable read-only memory. Other microcontroller features Many embedded systems need to read sensors that produce analog signals. This is the purpose of the  analog-to-digital converter  (ADC). Since processors are built to interpret and process digital data, i.e. 1s and 0s, they wont be able to do anything with the analog signals that may be sent to it by a device. So the analog to digital converter is used to convert the incoming data into a form that the processor can recognize. A less common feature on some microcontrollers is a  digital-to-analog converter  (DAC) that allows the processor to output analog signals or voltage levels. Time Processing Unit  (TPU) is a sophisticated timer. In addition to counting down, the TPU can detect input events, generate output events, and perform other useful operations. A dedicated  Pulse Width Modulation  (PWM) block makes it possible for the CPU to control power converters,  resistive  loads,  motors, etc., without using lots of CPU resources in tight timer  loops. Higher integration In contrast to general-purpose CPUs, micro-controllers may not implement an external address or data bus as they integrate RAM and non-volatile memory on the same chip as the CPU. Using fewer pins, the chip can be placed in a much smaller, cheaper package. A micro-controller is a single  integrated circuit, commonly with the following features central processing unit   ranging from small and simple 4-bit  processors to complex 32- or 64-bit processors discrete input and output bits, allowing control or detection of the logic state of an individual package pin. APPLICATION OF MICROCONTROLLER IN INSTRUMENTATION LIST OF MICROCONTROLLER BASED PROJECTS 1. MICROCONTROLLER AT-89C51 BASED METRO TRAIN PROTOTYPE USING LCD: The project shows resemblance as you are travelling in metro train. It will display three stations at LCD and a stepper motor to rotate clock or anti-clock wise. 2. MICROCONTROLLER AT-89C51 BASED VOTING MACHINE: The voting system for four candidates with memory backup to restore the results to be viewed with password. Now-a-days Electronic voting machines are being used effectively. The confidence of the voter in its flawless working is gradually building up and these machines are thus becoming quite popular throughout the country. Features of the electronic voting machine include avoidance of invalid votes and reduction of counting time and the consequent expenditure incurred on manpower deployment. By using the Microcontroller the voting machine can be built up easily and it will make simple to operate. 3. MICROCONTROLLER AT-89C51 BASED TEXT EDITOR CUM MOVING MESSAGE DISPLAY: The project comprises 30 keys to edit any message in English. One can restore the message in memory IC. The 16 characters at a time can be view in running mode. 4. MICROCONTROLLER AT-89C51 BASED FULL FUNCTION STEPPER MOTOR CONTROLLER: The project will operate the stepper motor in almost all modes viz. clock, anti -clock, speed and frequency control with time duration for both directions. 5. MICROCONTROLLER AT-89C51 BASED WATER LEVEL CONTROLLER CUM MOTOR PROTECTOR: It can indicate the level and control the water pump at top level filling. The present concept implements controlling of pump which pumps water from the sump (underground tank) to the overhead tank, using 8951 microcontroller. The control panel, i.e. the main control unit of the system which consists of the primary control switches, pump indicator, siren and level indicators. The visual example of how switches And the indicators can be placed as shown the figure below. 6. MICROCONTROLLER AT-89C51 BASED SIMPLE STEPPER MOTOR CONTROLLER: A simple stepper motor controller circuit with direction change only. A stepper motor (or step motor) is a brushless, synchronous electric motor that can divide a full rotation into a large number of steps. The motors position can be controlled precisely without any feedback mechanism (see Open-loop controller), as long as the motor is carefully sized to the application. Stepper motors are similar to switched reluctance motors (which are very large stepping motors with a reduced pole count, and generally are closed-loop commutated.) 7. MICROCONTROLLER AT-89C51 BASED AUTO GEAR SHIFTING SYSTEM: The circuit shows the demo of auto shifting of gears using stepper motor with the change in speed of vehicle. One can change the speed of DC motor as actual vehicle running wheel. Motorcycle is widely used around the world and particularly in Pakistan. The gear shifting system of the motorcycle is conventionally manual. This paper covers development of an indigenous automatic gear shifting/changing system for the standard motorcycle. By this system the manual mechanical gear-shifting system will remain unchanged because an additional electro-mechanical system is placed on the vehicle to shift the gear and for automatic controlling the clutch. So the system has both the options manual as well as automatic. This system uses low-cost microcontrollers to make the accurate decision for shifting the gear up and down by observing the speed, and it controls the clutch transmission where necessary. The complete hardware and software has been tested and the functioning of the automatic gear sh ifting system is verified. This system is flexible and can be used with any motorcycle manufactured in Pakistan ranging from 50cc to 200cc. 8. MICROCONTROLLER AT-89C51 BASED AUTO SPEED LIMITER WITH AUTO BREAKING: The project is to read the rpm of an automobile and according to that it limits the speed as Speed Governor. One can change the speed with variable control. This Project can be used with the three phase Induction motors. The circuit will take the full control of the motor and it will protect the motor from several faults such us over voltage and under voltage and the circuit will switch on the motor under safety conditions. The circuit was fully controlled by the microcontroller and the microcontroller wills continuously monitors the voltages of the three phases and if the voltage goes abnormal then it will switch off the motor until they are normal. All the conditions are displayed it over the LCD display. In our project we are using the popular 8 bit microcontroller AT89S52. It is a 40 pin microcontroller. 9. MICROCONTROLLER AT-89C51 BASED FASTEST FINGER FIRST: Useful for Quiz games, dumb charades. It displays the player no. along with the beep for seven players. 10. MICROCONTROLLER AT-89C51 BASED TEMPERATURE METER: It will display the room temperature on LCD and one can set the desired value to indicate the alarm or control at a desired temperature. It uses an ADC to interface with LM-35 sensor. 11. MICROCONTROLLER AT-89C51 BASED INFRARED REMOTE CONTROLLED SWITCH BOARD: One can operate (on/off) four electrical devices with TV remote synchronized with circuit independently. 12. MICROCONTROLLER AT-89C51 BASED RANK DISPLAY SYSTEM FOR RACE QUIZ COMPETITION WITH LCD: It can resolve the time difference (may be few milliseconds) and indicate the correct ranking between the individuals denoted A to H 13. MICROCONTROLLER AT-89C51 BASED AUTO SPEED LIMITER/GOVERNER WITH AUTO BREAKING: The project is to read the rpm of a automobile and according to that it limits the speed as Speed Governor. One can change the speed with variable control. 14. MICROCONTROLLER AT-89C51 BASED LINE FOLLOWER ROBOT: A Robotic car that follows the black line at the floor area based on IR sensors with transmitters and receivers. 15. MICROCONTROLLER AT-89C51 BASED YES MASTER FOLLOWER: A robotic car that follows his master who is sending an IR transmission always. 16. MICROCONTROLLER AT-89C51 BASED VOLTAGE/ POWER FACTOR / FREQUENCY METER: The project checks the electrical input factors as multifunction meter. 17. MICROCONTROLLER AT-89C51 BASED RFID ATTENDENCE MONITOR: The project will show the names of person who had pressed the RFID key on LCD. One can use DATA encoder/decoder circuit. 18. MICROCONTROLLER AT-89C2051 BASED FREQUENCY COUNTER USING LCD: The project will check the unknown frequency input up to 200 KHz. And display at LCD. 19. TRAFFIC SIGNAL CONTROL TRAFFIC MAN: It can actually control traffic with lights and humanoid robot police man rotating in all directions with hand movements for stop and go actions. This is a project comprises two stepper motors to perform the action. 20. MICROCONTROLLER AT-89C2051 BASED IR WIRELESS FREQUENCY COUNTER: The project will check the unknown frequency input up to 200KHz. Coming from an IR source and display at LCD. 21. MICROCONTROLLER AT-89C2051 BASED COUNTDOWN TIMER: The project performs the countdown operation for up to -99 minutes with two seven segments display showing actual time left to activate or de-activate the connected relay. 22. MICROCONTROLLER AT-89C2051 BASED TEMPERATURE INDICATOR: The temperature of room can be displayed at LCD using a sensitive device DS 1621. 23. MICROCONTROLLER AT-89C2051 BASED ALARM CLOCK: The unit display the time in Hr. Min. and one can set the alarm also for a desired time at Seven segment display. 24. MICROCONTROLLER AT-89C2051 BASED VEHICLE SPEEDOMETER CUM ODOMETER: The project comprises a dc motor speed controller circuit with reed sensor. It is being detected by this and displays the same at LCD in form of speed KmHr. and also display the distance covered by the vehicle. DETAIL OF SOME APPLICATION Microcontroller based Electronic Governor and Control System of a Mini-hydro Power Plant:- This project is absolute requirement to develop small-scale power plants. The idea is described in the introduction. Then there are some details about the functionality of the system. That is described in both user aspect and technical aspect. The idea will lead to fully automated power plants with remote access, while it is lower cost. Some attractive future development proposals will be at the end of the technical details. INTRODUCTION In brief our project is an Microcontroller based Electronic Governor Control System for Mini Hydro Power Plant. The courses of selecting this project were the expanding the features of the presently available mechanical governor systems and improve the remote controllability of the system in user-friendly manner. In this invention we selected specific mini hydro plant to consideration because of several limitations. The governor of a mini-hydro power plant considers as a heart of the system. It controls the output power and makes the generator frequency up to the grid frequency by utilizing the available water supply to the turbine. Those operations are achieved by controlling the gate valves of the turbine. Almost all the turbine units use this method of control and it comprises of a mechanical actuator and electrical control device to give the desired command signals to the actuator to open or close valves appropriately. Commercially available electronic governors are very expensive. It is very difficult to find a suitable commercial product for a particular power plant and not easy to tune them to reach the best operating condition. Therefore our main focus was to implement an electronic governor system for a user specific circumstance. So the initial stage, we studied the entire control system of a mini-hydro power plant that is situated at Niriella. Then we decided to develop this electronic governor system using newly promoted micro-controller technology. Other than the basic governor operations we impl emented several new features. To interact with the micro-controller some of the electronic devices were re-implemented. BASIC OPERATION Although its called an Electronic governor control system, it consists of some plant automating functions as well. All those functions can be categorized as follows. à ¢Ã¢â€š ¬Ã‚ ¢ Starting and shutting down sequences of the plant. à ¢Ã¢â€š ¬Ã‚ ¢ Frequency controlling until the generator is synchronized with the national grid. à ¢Ã¢â€š ¬Ã‚ ¢ Manual and automatic control of the power output. à ¢Ã¢â€š ¬Ã‚ ¢ Quick safety actions in fatal faulty conditions. FUNCTIONAL UNITS The entire system is an integration of several functional units. The system software controls those units. 1. Generator Frequency Counter 2. Grid Frequency Counter 3. Water Level Sensor 4. Valve Position Sensor 5. Stepper Motor Driver 6. Emergency Circuit Breaker unit 7. Main Board LCD interfacing with Microcontrollers Introduction The most commonly used Character based LCDs are based on Hitachis HD44780 controller. In this we will discuss about character based LCDs, their interfacing with various microcontrollers, various interfaces (8-bit/4-bit), programming, special stuff and tricks you can do with these simple looking LCDs which can give a new look to your application. Pin Description The most commonly used LCDs found in the market today are 1 Line, 2 Line or 4 Line LCDs which have only 1 controller and support at most of 80 charachers, whereas LCDs supporting more than 80 characters .Most LCDs with 1 controller has 14 Pins and LCDs with 2 controller has 16 Pins (two pins are extra in both for back-light LED connections). Keypad circuit diagram Usually these days you will find single controller LCD modules are used more in the market. So in the tutorial we will discuss more about the single controller LCD, the operation and everything else is same for the double controller too. Lets take a look at the basic information which is there in every LCD. LCD Initialization Before using the LCD for display purpose, LCD has to be initialized either by the internal reset circuit or sending set of commands to initialize the LCD. It is the user who has to decide whether an LCD has to be initialized by instructions or by internal reset circuit. We will discuss both ways of initialization one by one. Initialization by instructions Initializing LCD with instructions is really simple. Given below is a flowchart that describes the step to follow, to initialize the LCD. LCD initialization flow chart Figure 8: Flow chart for LCD initialization As you can see from the flow chart, the LCD is initialized in the following sequence 1) Send command 0x30 Using 8-bit interface 2) Delay 20ms 3) Send command 0x30 8-bit interface 4) Delay 20ms 5) Send command 0x30 8-bit interface 6)Delay 20ms 7) Send Function set see Table 4 for more information 8)Display Clear command 9) Set entry mode command explained below The first 3 commands are usually not required but are recommended when you are using 4-bit interface. So you can program the LCD starting from step 7 when working with 8-bit interface. Programming example for LCD Initialization CODE: LCD_data equ P2      LCD Data port LCD_D7    equ P2.7   LCD D7/Busy Flag LCD_rs    equ P1.0   LCD Register Select LCD_rw    equ P1.1   LCD Read/Write LCD_en    equ P1.2   LCD Enable LCD_init:               mov    LCD_data,#38H   Function set: 2 Line, 8-bit, 57 dots               clr    LCD_rs                           clr    LCD_rw            We are writing in instruction register               setb   LCD_en                        clr    LCD_en               acall LCD_busy      Wait for LCD to process the command               mov    LCD_data,#0FH   Display on, Curson blinking command               clr    LCD_rs                           clr    LCD_rw            We are writing in instruction register               setb   LCD_en                        clr    LCD_en               acall LCD_busy          Wait for LCD to process the command               mov    LCD_data,#01H   Clear LCD               clr    LCD_rs                           clr    LCD_rw            We are writing in instruction register               setb   LCD_en                        clr    LCD_en               acall LCD_busy         Wait for LCD to process the command               mov    LCD_data,#06H   Entry mode, auto increment with no shift               clr    LCD_rs             Selected command register               clr    LCD_rw            We are writing in instruction register               setb   LCD_en                        clr    LCD_en               acall LCD_busy    Wait for LCD to process the command               ret                            Digital Countdown Timer (AT89C2051) A simple count-down LED timer that counts in minutes and seconds. Three buttons below the LED provide control of the unit, allowing you set the desired countdown time in minutes and seconds and a start/stop button. Completion of the countdown is indicated by an alarm that starts when the countdown has finished and the display reads zero. The alarm is stopped by pressing the start/stop button. Circuit diagram:- count AUTOMATIC SOLAR TRACKER AUTOMATIC SOLAR TRACKER starts following the SUN right from dawn, throughout the day, till evening, and starts all over again from dawn next day. On cloudy weathers, it remains still and catches the SUN again as it slips out of clouds. It does all this automatically, employs cheap and inexpensive components, and is very accurate. Let us see how it does all this. There are three Electronic Modules to be explained. First one is the HORIZONTAL SENSOR MODULE. It employs the timer 555 in the MONOSTABLE MODE. PIN 2(Trigger Pin of 555) is hooked up with a VOLTAGE DIVIDER NETWORK (PLEASE see FIGURE 2). PIN 4(Reset) is hooked up with ANOTHER VOLTAGE DIVIDER NETWORK.   Fig 1: Block diagram of the tracker following the sun all through  Fig 1: Block diagram of the tracker following the sun all through fig 4: Stepper motor control board  Fig: Stepper motor control board I have only shown the Horizontal Motor Control Circuit. The Vertical One uses a similar Decade Counter, NPN Transistors, and Diodes (to encounter BACK EMF of Power Transistors due to Fast Switching). I chose for a Steep Angle of 2 Degrees for the Unipolar Steppers. They are driven in a Normal 4 Step Sequence, first coil A is energised simultaneously with coil B, then coil C with coil D. Thus the Motors rotate by 2 degrees each time. The Charging Interval is almost in synchronism with the steps/second speed of the motors, to avoid false triggering. STEPPER MOTOR Introduction This section will explain you everything that you need to know about stepper motors. Stepper motors can be used in various areas of your microcontroller projects such as making robots, robotic arm, automatic door lock system etc. This tutorial will explain you construction of stepper motors, basic principal, different controlling types (Half step and Full step), Interfacing Techniques (using L293D or ULN2003) and programming your microcontroller in C and assembly to control stepper motor. Unipolar stepper motor The unipolar stepper motor has five or six wires and four coils (actually two coils divided by centre connections on each coil). The centre connections of the coils are tied together and used as the power connection. They are called unipolar steppers because power always comes in on this one pole. Bipolar stepper motor The bipolar stepper motor usually has four wires coming out of it. Unlike unipolar steppers, bipolar steppers have no common centre connection. They have two independent sets of coils instead. You can distinguish them from unipolar steppers by measuring the resistance between the wires. You should find two pairs of wires with equal resistance. If youve got the leads of your meter connected to two wires that are not connected (i.e. not attached to the same coil), you should see infinite resistance (or no continuity). As already said, we will talk mostly on Unipolar stepper motors which is most common type of stepper motor available in the market. A simple example of 6 lead step motor is given below and in 5 lead step motor wire 5 and 6 are joined together to make 1 wire as common. Unipolar stepper motor coils Working of Stepper Motor Now lets discuss the operation principal of a stepper motor. When we energize a coil of Stepper motor, the shaft of stepper motor (which is actually a permanent magnet) align itself according to poles of energized coil. So when motor coils are energized in a particular sequence, motor shaft tend to align itself according to pole of coils and hence rotates. A small example of energizing operation is given below. working principal of stepper motor You can see in the example, when coil A is energized, A north-south polarity is generated at A+A as shown in the figure above and magnetic shaft automatically align itself according to the poles generated. When the next coil is energized the shaft again aligns itself and takes a step. Hence , the working principal. working principal of stepper motor We have seen that to make the stepper motor work, we need to energize coil in a sequence. The explanation and generation of the sequence is explained in the next section of the tutorial. Stepper Motor interfacing with Microcontrollers: Programming Stepper motor Programming Full step Sequence I am assuming that stepper motor is connected at Port 1.0 to Port 1.3. Adjusting the delay will increase or decrease the speed of the motor. Here just for demonstration i have taken some delay, you can change it as you want.    org 0H stepper equ P1 main:             mov stepper, #0CH             acall delay             mov stepper, #06H             acall delay             mov stepper, #03H             acall delay             mov stepper, #09H             acall delay             sjmp main delay:             mov r7,#4 wait2:             mov r6,#0FFH wait1:             mov r5,#0FFH wait:             djnz r5,wait             djnz r6,wait1             djnz r7,wait2             ret             end The working of the above code can be seen in the demo animation below. unipolar stepper motor in full step sequence Programming Half step Sequence Assembly Programming: Here also the main routine changes rest everything remains same. CODE: main:             mov stepper, #08H             acall delay             mov stepper, #0CH             acall delay             mov stepper, #04H             acall delay             mov stepper, #06H             acall delay             mov stepper, #02H             acall delay             mov stepper, #03H             acall delay             mov stepper, #01H             acall delay             mov stepper, #09H             acall delay             sjmp main The working of the above code can be seen in the demo animation below. unipolar stepper motor in half step sequence Water level indicator cum controller Water level indicator is which pumps water from the sump (unrepresented concept implements controlling of pump reground tank) to the overhead tank, using 8951 microcontroller. The control panel i.e. the main control unit of the system which consists of the primary control switches, pump indicator, siren and level indicators. The visual example of how switches. And the indicators can be placed as shown the figure below. Front view of the model Front view of the model In the figure shown above there are total of nine LEDs, four of which indicates the water level in the tank, another four indicates the water level in the sump and one LED indicates whether the pump is ON/OFF. It also consists of three switches. 1. Switch 1 is the main power switch which is used to activate the system. 2. Switch 2 is used to select whether to operate the pump in AUTO or MANUAL mode. 3. Switch 3 comes to picture only when the system is operated in MANUAL mode. It controls the direct activation of the pump. Description: This system is built around an 8951 microcontroller and the circuit diagram is as given below. Circuit diagram of Water level indicator cum controller As you can see in the above diagram, port 0 is exclusively used as an input port which takes the information regarding the water level in the sump as well as in the overhead tank. Port 1 is used as output port which is connected to the indicator that indicates the water level in both the tanks. Port 2 is used as in/out port, it takes the input from switch 2 and switches 3 and gives the output which is connected to pump indicator, siren and the relay which controls the switching of the pump. Working of the system: There are two modes of working for the system 1. Manual mode 2. Auto mode Manual mode: When the system is active and in manual mode, it only indicates the water levels in the tanks and it doesnt control any working of the pump. To activate the pump in manual mode switch 3 is used. In this mode the operator should manually control the working of the pump. As in case if the tank is full, operator should switch of the pump which is not the case when compared to auto mode. Auto mode: When the system is active and in auto mode, it only indicates the water levels in the tanks and it controls the working of the pump. Conclusion   Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚   This is the easiest way to make the Host Computer to pin connection. The next step is actually using this connection to download programs to the internal memory and to receive debug information through the IC. Microcontrollers are used in automatically controlled products and devices, such as automobile engine control systems, implantable medical devices, remote controls, office machines, appliances, power tools, and toys. By reducing the size and cost compared to a design that uses a separate microprocessor, memory, and input/output devices, microcontrollers make it economical to digitally control even more devices and processes. Mixed signal microcontrollers are common, integrating analog components needed to control non-digital electronic systems.

The Importance of Names in The Crucible by Arthur Miller Essay

The Importance of Names in The Crucible by Arthur Miller What is the importance of names? In this essay I will be trying to answer the question â€Å"What is the importance of names.† Based on the play – The Crucible. Briefly I will explain what happened in the play. In Salem village, Massachusetts, in 1692, which hysteria swept the area? Salem village was a puritan society, you either loved God and did no wrong or you lived with a blackened name. A group of young girls were found dancing naked in a forest. Two of the girls then fell unconscious for a few days. Some of the residents of Salem village said it was witchcraft, from then onwards madness struck in Salem village. Hundreds of people were arrested because they were said to have done work for the devil. The play then goes on to focus on two people named John and Elizabeth Proctor, who were accused and it shows how they reacted throughout the witch hysteria. To set the scene, Betty is aged ten. She was one of the girls that fell unconscious in the forest. Reverend Parris is her father and Abigail Williams is her cousin, they are both very upset about Betty. Abigail was also found in the forest with Betty. Parris is obviously upset and he starts to question Abigail. â€Å"Your name is entirely white, is it not.† he asks her, Abigail answers â€Å"There be no blush about my name.† Already names are being questioned whether they are white or black? When witchcraft was cried in Salem village, Massachusetts, Abi...

My Psychosocial Stage of Development Essay

My Psychosocial Stage of Development S. Pulliam April, 2011 First I would like to define psychosocial development; this is the development of the personality or the acquisition of social attitude and skill from infancy through maturity. Based on the charting from Erickson’s Psychosocial Stages of Development, I fall into two separate categories based on my age. From the beliefs of Erickson, he believed that the achievements and failures of earlier stages influence later stages, whereas later stages modify and transform earlier ones (Erickson, 1980). The first is Young Adulthood and the second is Middle Adulthood. In the two stages from the chart the information is based on (Young adulthood) Intimacy v/s Isolation and the second one (Middle Adulthood) is based on Generativity v/s Stagnation Work and Parenthood Adults. Although there are two separate stages in the psychosocial stages that I fall under, I feel that I am at the midpoint for each and I have decided to consider both aspects in doing my psychosocial stages of development. To explain how the two stages correlate to my life, I decided in the last year to settle down and get married this is based on my young adulthood information from Erickson’s chart. The reason there is a correlation to my life based on Erickson’s chart under middle adulthood id because my life had children prior to the marriage but I am taking a more active role in being involved with activities and school when it comes to my children. In looking at my current psychosocial stage of development influence on my behavior and relationship, I find that I am a calm, and not hard to get along with even under pressure situations that has occurred with us based on my jealous tendencies and insecure ways because of previous relationship and not being with the father of my children. The influence that I see in young adulthood over my relationship is that there is a need for intimacy but not a major desire to have it on a regular basis. The isolation comes from not being so open and friendly to other males in my life or surrounding because of my relationship with my husband. I have male friends that I am social with but I do not allow the intimacy line to be crossed because of my relationship with my husband. The influence that I see in middle adulthood is the need to have a nurturing relationship with my children and creating a positive change to benefit my children lives. In looking at this I made changes in the way I approached my children and how I would not shelter them from the truth when they would ask me questions but give them true answer to their question. As small children I did not feel the need to give much explanation to my children’s questions but now I try to explain everything to them without being untruthful to them or give them false ideas about what is going on around them. To explain the positive and negative outcomes to psychosocial stages of development, I would have to say that there are many positive and negative but the few that stand out to me the most are. First negative outcome, getting over insecurities I had about the intimacy relationship that I chose to take on after breaking off a 10 year relationship with my children’s father. The second negative outcome was getting over the trust issues I had before going into the current marriage that I am in right now. The third negative outcome was getting pass the change of personality and ways I had to endure going into the marriage and getting use to a new personality and making the changes on both parts to make our marriage work to the best of our ability. Based on this information I feel that the positive outcomes to the psychosocial stages of Erickson were in a good way and I can see the difference in my life and marriage. First positive outcome was that I am able to trust again within my relationship with my husband. The second positive outcome was that I made a strong bond with my children and I have not only been a mother to my children but I am the friend that my children confide in when they have feeling they want to express. The third positive outcome I see is that I am calm and stress free with the way I deal with problem within my relationship and I am able to compromise with my spouse when we do not agree on things. In evaluating how other developmental issues have influenced my personality, I would have to say that during my early childhood life I dealt with a few attachment issues with my mother. I feel that during this stage I did not bond with my mother like most children tend to do when the mother is present because she was pre-occupied with her career as a teacher and coaching. So during this age I was in close relationship with my father and I never felt the true connection with myself and my mother like so many girls or women tend to have with a mother. Most of my time I spent with my father and aunts when I was in my early childhood age so I did not really know that much about my mother other than she coached and taught physical education. I admired what she did so I took on the quest of becoming a physical education teacher as well. In School age time I had to bare a lot of pressure in participating in sports and in my school work because the expectation was so high on me to achieve my education and athletic abilities because of what my mother represented in our community. At the same time I was pressured by other students because they felt that the only reason I made the team was because of my mother not because of my own ability. Once I graduated my goals with education were so different. I felt more of the need to help others in crisis situation so I went back to school to get my degree in mental health and social work and that is still my drive today. So from this experience I feel that I have a very strong personality in spite of the way so many tried to bring me down and I am a true fighter for what I believe in deep within my heart. My personality from what I can see is a driving force of who I am and I refuse to be compared to my mother in my quest to achieve greater feats in my life and the way I live my life. It is okay to be compared to her but I know that I could never be my mother or even like her because my drive and ambition is so different from the way she handles things. References http://www. support4change. com/stages/cycles/Erikson. html Erikson E. , 1980. Identity and the Life Cycle. Norton, New York http://currentnursing. com/nursing_theory/theory_of_psychosocial_development. html

Case Study 1: What’s the Buzz on Smart Grids?

CASE STUDY 1: What's the Buzz on Smart Grids? 1. How do smart grids differ from the current electricity infrastructure in the United States? Current electricity grids do not provide any information about how consumers actually use energy. That makes it difficult to develop more efficient approaches to distribution. The current system offers few ways to handle power provided by alternative energy sources. Without useful information, energy companies and consumers have difficulty making good decisions about using energy wisely. A smart grid delivers electricity from suppliers to consumers using digital technology to †¢ save energy reduce costs †¢ increase reliability and transparency The smart grid enables information to flow back and forth between electric power providers and consumers and †¢ allows both consumers and energy companies to make more intelligent decisions regarding energy consumption and production. †¢ provides information that would help utilities ra ise prices when demand is high and lower them when demand lessens. †¢ helps consumers program high-use electrical appliances like heating and air conditioning consumption times usage systems to reduce during of peak usage. could possibly lead to a five to fifteen percent decrease in energy consumption. 2. What management, organization, and technology issues should be considered when developing a smart grid? Management: Information feedback would allow consumers to see how much energy they are consuming at any moment and how much it’s costing them. That would allow them to make better decisions about using appliances like air conditioners and furnaces. They could potentially lower their energy bills. However, governments and energy companies need to help consumers overcome the intrusive feelings associated with the technology.Dashboard monitoring software must be easy for consumers to understand and use. Organizations: There are many disincentives for energy companies ass ociated with smart grids. Operating budgets and profits would be severely impacted if consumers greatly reduced their energy consumption. Implementation costs would be extremely high, even with federal government assistance. Consumer backlash is already evident in the few experimental cases to date. Without properly structuring the implementation, that backlash could grow against the energy companies.Technology: Networks and switches for power management, sensor and monitoring devices to track energy usage and distribution trends; systems to provide energy suppliers and consumers with usage data, communications systems to relay data along the entire energy supply system, and systems linked to programmable appliances to run them when energy is least costly, are all expensive and time consuming to retrofit into all the homes across the nation. Basically, the entire energy infrastructure would require retrofitting. 3.What challenge to the development of smart grids do you think is most likely to hamper their development? Some challenges to the development of smart grids include: †¢ Changing the infrastructure of the entire electric grid across the nation †¢ Installing two-way meters that allow information to flow both to and from homes and businesses †¢ Creating dashboards that are user-friendly †¢ Extremely high costs of retrofitting the entire grid infrastructure, estimated to be as high as $75 billion †¢ Potential intrusiveness of new technology †¢ Perceived and real loss of privacy Potential economic impact on energy companies 4. What other areas of our infrastructure could benefit from ‘smart’ technologies? Describe one example not listed in the case. One example that could benefit from smart similar to the electric grids is monitoring water usage in homes and businesses. Smart technologies could allow water utilities and consumers to †¢ Monitor water flows much like electric usage †¢ Turn off lawn sprinkl ers during the heat of the day or based on predetermined schedules †¢ Use monitors in lawns and around plants and shrubs to prevent over- or under-watering †¢ Monitor evaporation rates Monitor fountains, and other water for usage pools, features of usage 5. Would you like your home and your community to be part of a smart grid? Why or why not? Explain. Yes, I would like my home to incorporate the new smart grid technology because it offers to save energy, reduce cost, and increase reliability. Understandably, there may be costs associated with this production such as maintenance, installation, etc. However, I would be willing to pay a little extra up front if I would be saving a lot more throughout its usage. Not to mention helping the environment would not be a bad incentive.

Borderline Personality Disorde essays

Borderline Personality Disorde essays To help the world understand why humans perform certain actions, we have to study the human mind. Specifically fields that will help progress mankind. Trying to understand why psychopaths and borderline personality disorders commit the crimes that they do is an important step in the direction of preventing it. The article, Emotion in Criminal Offenders With Psychopathy and Borderline Personality Disorder addresses this field accurately. Although it focuses on the physiological aspects of this field, it will help understand it. This study was performed because the authors felt that criminal offenders that are diagnosed with psychopathy and/or borderline personality disorder share an unprompted nature that tends to differ from normal humans. They (the authors) aim to prove that criminals with Psychopathy and borderline personality disorder will have different responses to unpleasant and pleasant stimuli than the control group. This is my guess at the general hypothesis the authors were going for. The article states, Compared with controls, psychopaths were characterized by decreased electrodermal responsiveness, less facial expression, and the absence of affective startle modulation. (737) The methods that the authors used to conduct this study were as follows: Twenty-five psychopaths as defined by the Hare Psychopathy Checklist and 18 subjects with BPD from 2 high-security forensic treatment facilities were included in the study along with 24 control subjects. Electrodermal response was used as an indicator of emotional arousal, modulation of the startle reflex as a measure of valence, and electromyographic activity of the corrugator muscle as an index of emotional expression. I know that we were supposed to answer that question in our own words, however I felt that the authors knew much more than me about this specific experiment and that their words could portray the idea much...

Moonstruck Essay Example

Moonstruck Essay Example Moonstruck Essay Moonstruck Essay Loretta and religious aspects conveys clearly through this unforgettable movie. Additionally, regarding what Loretta has done, it is indirectly symbolizing the Western Culture where most married people usually dont consider the sanctity of marriage as one of the most important values of marriage. The way Loretta undergoes her life is really pathetic where her mind sticks with the perception that her life is based on bad luck: Because I have no luck. She believes that the reason why her husband gets killed In a bus accident is because of ere action In contravening the sacrament of marriage. As she was a Catholics, she knows that marriage should be held at a church, not a city hall where she said, Maybe If you gave me away, and I got married In a church, In a wedding dress, Instead of at the City Hall with strangers standing outside the door, maybe then I wouldnt have the bad luck I had. Likewise, her mother also thinks that it is better if Loretta doesnt get married again. Her mother says, Nil Bad luck! Your mom and I been fifty-two years and nobody died. You were married, what, two years, and embody is dead. Dont get married again, Loretta. It doesnt work out for you. Thus, at the end, she believes that her next marriage with Johnny is just a formality. According to the sacraments of marriage, after men and women were engaged, no fornication should be involved. Lamentably, this rule sins followed by Loretta who has engaged in a sexual tryst with Irony Cameras, the younger brother of her fiancà ©Ã‚ ©, Johnny Cameral. However, both of them find their happiness together because they give something valuable to each other. Loretta makes Irony realize that he Is to the only person who has suffered hardship and Irony awakens her to the fact that she needs love and passion in her life, not a future marriage with a man who only gives an assurance of a stable life. Moreover, Loretta is more like Johnnys mother rather than a wife, because Johnny is like a big baby who always follows what his real mother says. Reflecting to what Loretta has done, her father, Cosmos Castration also violates the sanctity of marriage by having an affair with his mistress, Mona. However, since his wife, Rose Castration is a self-assured, strong Oman who is not afraid to assert herself over her husband, she reveals her feeling to him and makes him realize once again that he sincerely still loves his wife. With Loretta, she tries to repay It by making a confession to a priest in her church, meaning to release her guilty conscious of cheating on her fiancà ©Ã‚ ©. Moonstruck presents the relationship between Loretta and the Church as affirmative rather than oppressive. This Is shown by how the priest doesnt castigate her, Instead reminding her to not commit the past mistakes. Similarly, when Rose Castration prays deeply and Nils clearly clarets Tanat spiritually Is an Important aspect In near Tie. It Is very obvious to see that both Loretta and her mother have close connection between their life and their religious. Furthermore, when exploring the movie deeper, one sees that sanctity of marriage should be contained with humbleness, patience, honesty, forgiveness of mutual offenses, faith in the power of God, and kindness. As being a Catholic, Loretta and Her mother success in fulfilling those criteria and indeed, both of them have faith in the power of God that He will give the best for their marriage. In fact, Loretta mother knows that her husband is cheating on her and it Just based on her instinct as a wife. In addition, forgiveness is one true aspect that Loretta mother has where she truly forgives her husbands fault and only demands him to not meet his mistress again. This forgiveness can be seen in Loretta life where she forgives her parents for their past mistake for not letting her and her deceased husband marry in the church.

Number of Supreme Court Nominees By President - List

Number of Supreme Court Nominees By President - List President Barack Obama successfully chose two members of the U.S. Supreme Court and has a chance to nominate a third before his term ends after 2016. If hes able to push a candidate through what can be a politically charged and sometimes lengthy nomination process, Obama will have chosen a third of the nine-member court. So how rare is that? How many times has a modern president gotten an opportunity to choose three justices? Which presidents have nominated the most Supreme Court justices and had the largest impact on makeup of the highest court in the land? Here are some questions and answers about the number of Supreme Court nominees by president. How did Obama get the chance to nominate three justices? Obama was able to nominate three justices because two members of the Supreme Court retired and a third died in office. The first retirement, that of  Justice David Souter, came a short time after Obama took office in 2009. Obamas chose Sonia Sotomayor, who later become the first Hispanic member and third woman justice to serve on the high court. A year later, in 2010, Justice John Paul Stevens gave up his seat on the court. Obama picked Elena Kagan, a former Harvard Law School dean and solicitor general of the United States who was widely seen as a consensus-building liberal. In February 2016, Justice Antonin Scalia died unexpectedly. Is It Rare For a President to Get to Nominate Three Justices? Actually, no. Its not that rare. Since 1869, the year Congress increased the number of justices to nine, 12 of the 24 presidents preceding Obama successfully chose at least three members of the Supreme Court. The most recent president to get three justices on the high court was Ronald Reagan, from 1981 through 1988. In fact, one of those nominees, Justice Anthony Kennedy, was confirmed in a presidential-election year, 1988. So Why Were Obamas 3 Nominees Such a Big Deal? That Obama had the opportunity to nominee three Supreme Court justices was not, in an of itself, the big story. The timing - his final 11 months in office - and the impact his choice would have on setting the ideological course on the court for decades to come made his third nomination such a big news story and, of course, a political battle for the ages. Related Story: What Are Obamas Chances of Replacing Scalia? Which President Has Chosen the Most Supreme Court Justices? President Franklin Delano Roosevelt got eight of his nominees on the Supreme Court over the course of just six years in office. The only presidents who have come close are  Dwight Eisenhower, William Taft and  Ulysses Grant, whom each got five nominees on the court. So How Does Obamas 3 Picks Compare to Other Presidents? With three picks for the Supreme Court, Obama is exactly average. The 25 presidents since 1869 have gotten 75 nominees on the high court, meaning the average is three justices per president. So Obama falls right in the middle. Here is a list of presidents and the number of their Supreme Court nominees who made it to the court since 1869. The list is ranked from presidents with the most justices to those with the least. Franklin Roosevelt: 8 Dwight Eisenhower: 5 William Taft: 5 Ulysses Grant: 5 Richard Nixon: 4 Harry Truman: 4 Warren Harding: 4 Benjamin Harrison: 4 Grover Cleveland: 4 Ronald Reagan: 3 Herbert Hoover: 3 Woodrow Wilson: 3 Theodore Roosevelt: 3 Barack Obama: 2* George W. Bush: 2 Bill Clinton: 2 George H.W. Bush: 2 Lyndon Johnson: 2 John F. Kennedy: 2 Chester Arthur: 2 Rutherford Hayes: 2 Gerald Ford: 1 Calvin Coolidge: 1 William McKinley: 1 James Garfield: 1 * Obama has not yet nominated a third justice, and it remains uncertain whether his choice will will confirmation.

Group Media Assignment Essay Example | Topics and Well Written Essays - 1000 words

Group Media Assignment - Essay Example As a result, the oil and gasoline prices have plunged down significantly. The focus of the world has been on the United States since it is providing half of the total reserves that are to be released and the US government too has been proactive in justifying its decision; proclaiming that the move was not based on any political motives. Though this decision has faced a great deal of criticism from all corners, the US believes that the release would help in lessening the gap between demand and supply of oil. The article is very appositely related to the concepts of Demand and Supply. Before the political explosion in Libya, the supply and demand of crude oil were relatively stable and a reasonable equilibrium existed between price and quantity, but as soon as the oil production in Libya cut down, the supply fell tremendously, whereas the demand remained almost unchanged. This led to a higher equilibrium price and lower quantity. Now, with oil being released by US and its allies, the s upply would rise to counter the demand. The current decline in oil prices is its confirmation. The reduction in the supply of crude oil from Libya can also be understood in terms of the effects of one of the Supply determinants, namely Number of Suppliers. Since the number of crude oil suppliers in the world are limited, so when Libya, which is one of the major suppliers, departed from the scene, the supply automatically plummeted. Moreover, the demand remained unchanged due to an important Demand determinant, namely Price of Related of Goods. Since, crude oil has numerous complements whereas nearly no substitutes its demand never fell. (400 words) China Investigates Pricing by 2 Broadband Companies The article ‘China Investigates Pricing by 2 Broadband Companies’ by Barboza (2011) published in the New York Times reports about the monopolistic behavior of two of the largest government owned telecommunication firms, China Telecom and China Unicom. With regular grievances from customers that the two companies overcharge them and deliver comparatively low speeds for Broadband Internet, the National Development and Reform Commission has decided to examine whether the companies have violated the Antimonopoly Law. Analysts believe that this enquiry has come about mainly due to consumer pressure because in China, the state has always supported oligopolies with little contest and huge profits. Li Qing who works as the deputy director of the bureau of price monitoring and antimonopolization at the National Development and Reform Commission reported the fact that combined revenues of Telecom and Unicom were $10 billion in 2010 and greater than 66% of the market share belonged to the two giants. Zhang Bin, a telecommunication expert provides a different view, saying that the government did try to create competition in the industry among a few major firms; however, the outcome was not as expected and the oligopoly continues to thrive. The article pertinently relates to the concept of oligopoly. Since there are only two companies, Telecom and Unicom, involved in the oligopoly, hence, it can also be called a duopoly. These two giant telecommunication companies satisfy all the characteristics of an

Case study of Aetna 2000 Example | Topics and Well Written Essays - 750 words

Of Aetna 2000 - Case Study Example been purchasing a new business, thus, expanding its range of operations, and in turn having a variety of services in the healthcare sector with its various health products. They also offer a range of financial products and services. The company, due to its acquisition of a number of businesses, operates internationally and even provides pension services. The company is considering reorganizing its structures so that the health services will be grouped as global health, and the financial services will be grouped as global financial. This will facilitate efficiency and cost effectiveness in the company due to the sharing of resources for both local and international operations, as well as the use of technology. Through this, quality will be achieved in the company’s operations. Due to the procedure of its operation and those of the newly purchased businesses, the company is facing so many legal issues, with the government finding out that it is operating against what is legally recommended for such operations. After acquisition of Well Point Inc. business, Aetna went into an agreement to purchase other businesses dealing in insurance products, yet the businesses were operating as non-profit ones yet Well Point is a profit making business. This means that Aetna did not expect to make any profits from the acquisition. The company was involved in the provision of managed health care services. It is provided that for any loss of life, such businesses will be liable, and with this being a law within the nation, the business was obliged to ensure that no loss occurs to their client so that they are not held liable. There has been an increase in the cost of health care in the nation with a very high percentage. This has affected the company because just like other companies in the organization, they are committed to enhancing a reduction of the cost for the benefit of their clients, which may results to a decline in profitability. There is increased competition from

DESIGN A RETENTION PLAN FOR FUTURE RADIOLOGY EMPLOYEES Assignment

DESIGN A RETENTION PLAN FOR FUTURE RADIOLOGY EMPLOYEES - Assignment Example In addition, most programs fail to plan and time the hiring of physicians when multiple providers are needed. They have failed to develop short-and long-term strategic staffing plans. The other problem is absence of a clearly defined recruitment process, a host of hospitalist programs have failed to create a well-planned and choreographed recruitment process, leading to missed opportunities and/or a hiring mismatch (Simone, 2009). The other problem is hiring mismatch, many programs hire providers who do not fit in with the practice â€Å"culture.† There is a mismatch between vision, values, and objectives of the hospitalist program and the newly hired physician (Harris & Hartman, 2001). This can translate to disruptive behaviors within the hospitalist practice, low morale, and can result in poor provider and program performance. The last problem and which is the focus of this study is lack of a retention plan. Most programs have been successful in finding a good physician-prac tice fit but failed in support and integration of the new physician into the practice, hospital and community. A poorly developed retention plan or the absence of one can lead to physician turnover (Mathis & Jackson, 2010). Physician turnover can result in staff shortages, which may lead to program instability, such as being disruptive to the â€Å"chemistry† of a practice, provider job dissatisfaction, provider burnout, and subsequent poor clinical outcomes. Provider turnover can be quite costly to a hospital program, as numerous costs are associated with replacement of providers (Simone, 2009). These costs include those associated with recruitment, such as sign-on bonuses, medical school loan repayment, relocation expenses, lost productivity for hospitalist and hospital staff during the recruitment process, headhunter fees, and revenues lost during

Cybersecurity Assignment Example | Topics and Well Written Essays - 250 words - 3

Cybersecurity - Assignment Example They should be considered by the company as part of the security structure, and thus included in the responsibility scope. Addressing cyber security is not only an IT risk and issue. Organizations are now far too reliant on technology to survive such circumstances unscathed. Organizations must approach cyber security just like any other business risk. Particular subject matter experts can deal with the instant response and strategic details, but the leadership should identify and control the cascading monetary, reputational, in addition to operational impacts (Anderson, Schanfein, Bjornard & Moskowitz, 2011). It should as well as ensure effective and precise crisis communications all through all stakeholder-facing trade areas. It is possible to stop being skimmed. Look at the ATM entrance for sites where a scammer could hide a minute camera, like a brochure rack. Another way is to scrutinize the keypad to see if there is a false cover on top of it. In addition, look over the whole ATM for the parts that do not match in styling, material or color. Lastly, cover the hands when entering the PIN. It is one of the most effective and easiest ways to avoid an ATM scammers concealed

Narrative Writting Essay Example | Topics and Well Written Essays - 1000 words

Narrative Writting - Essay Example I’ve lived here for about a year, but I still don’t know all that many people and an invitation to a costume party is unlikely at this point. The only people I know are the policeman and his wife next door and they’re not really the partying type. Then the doorbell rings. Not just the one she’s standing next to in the movie, but the one right behind my head. I almost hit my head on the ceiling I jump so high. The ring is followed immediately by frantic knocking. The knowledge that it’s the killer on the other side of the door in Scream doesn’t help much in getting me to answer the door. My feet are lead anvils and my legs are Jell-O, but some kind of curious invisible hook has snagged inside my belly compelling me to move to the door even while the two hemispheres of my brain argue back and forth about the wisdom of this movement. My right arm reaches to bang on the neighbor’s wall. He is a cop, after all. But the wall we share is on my left side, so it’s a fruitless but valiant effort by the creative side of me to preserve me from my logical curiosity. The ten steps it would take for me to reach the door of my tiny apartment have stretched to a marathon mile and the standard beige carpet has become molasses warmed. I have to walk past a darkened hallway on my right before I even come close to the door. The air kicks on at just this moment and I receive a quick burst of warm air puffing out of the open spaces. It feels like the breath of some giant creature leaning against my neck. The air is stale, I haven’t cleaned yet this week, and it’s full of dust since this is the first week the heater’s been on this year. This hallway reaches back into the bedrooms and bathroom areas. It’s an open hole, a gaping darkness, threatening to swallow me up or concealing malevolent beings, I don’t know which. I’m actually afraid to move across this open space. It just now occurs to me that the cat had

Will be provide Essay Example | Topics and Well Written Essays - 500 words

Will be provide - Essay Example creased from 3 to 3% and following system stabilization the flow set point percentage was found to remain constant but the position of the flow valve had closed slightly from 30.1 to 47.5%. Additionally, the level valve had closed from 32.7 to 25.6%. The results were recorded. The level of the tank and the capacity section was ascertained with the help of a meter stick attached to the tank and the reading was compared to that of a controller. The compared levels ((%) vs. level) was plotted in meters and from the figure the line of best fit as determined by the transmitter gain was found to be1.206 %/cm. The next part of the experiment involved comparison of readings taken from four different flow measuring devices to a standard change in volume over time. While the flow rates of the rotameter and transmitter were read in USGPM, those of the controller and console were taken as percent rates. With gradual increase in the height over time the changes noted in the height was used for volume calculation. Appendix 2 includes the flow rates and after conversion of the actual flow rates to USGPM, a comparison between all the actual, rotameter and transmitter flow rates indicated a mutual agreement in the rates. The flow rates of the console and controller were closer as they used the same controller. The characteristics of the valve were determined for the flow and level value by increasing the flow percentage and taking the valve position values from the display controller. A plot of the Fractional Flow (Flow %/Max Flow %) vs. fractional valve opening which is indicative of the flow and level valve can be used to determine valve characteristics such as to quick-opening, linear, or equal-percentage relationships. In this case, a plot of both valves showed an almost linear valve character except for a slight distortion in the quick opening which can be attributed to drop in pressure across the value. While the valves had identical and linear characters originally,

Narrative Writting Essay Example | Topics and Well Written Essays - 1000 words

Narrative Writting - Essay Example I’ve lived here for about a year, but I still don’t know all that many people and an invitation to a costume party is unlikely at this point. The only people I know are the policeman and his wife next door and they’re not really the partying type. Then the doorbell rings. Not just the one she’s standing next to in the movie, but the one right behind my head. I almost hit my head on the ceiling I jump so high. The ring is followed immediately by frantic knocking. The knowledge that it’s the killer on the other side of the door in Scream doesn’t help much in getting me to answer the door. My feet are lead anvils and my legs are Jell-O, but some kind of curious invisible hook has snagged inside my belly compelling me to move to the door even while the two hemispheres of my brain argue back and forth about the wisdom of this movement. My right arm reaches to bang on the neighbor’s wall. He is a cop, after all. But the wall we share is on my left side, so it’s a fruitless but valiant effort by the creative side of me to preserve me from my logical curiosity. The ten steps it would take for me to reach the door of my tiny apartment have stretched to a marathon mile and the standard beige carpet has become molasses warmed. I have to walk past a darkened hallway on my right before I even come close to the door. The air kicks on at just this moment and I receive a quick burst of warm air puffing out of the open spaces. It feels like the breath of some giant creature leaning against my neck. The air is stale, I haven’t cleaned yet this week, and it’s full of dust since this is the first week the heater’s been on this year. This hallway reaches back into the bedrooms and bathroom areas. It’s an open hole, a gaping darkness, threatening to swallow me up or concealing malevolent beings, I don’t know which. I’m actually afraid to move across this open space. It just now occurs to me that the cat had

New product in Qatari market ( Recorder pen ) Essay

New product in Qatari market ( Recorder pen ) - Essay Example The fourth section comprises of SWOT analysis of the business and product being offered. Fifth section provides a detailed discussion about segmentation, targeting and promotion strategy of the company. Sixth section provides a detailed marketing mix for the product, and the last section discusses the ethical dilemma of the product. The company, Qatar Deja Vu, is a newly established Qatari based company which is focusing on providing state of the art electronic products with smart and amazing use of technology. However, during this short history of 15 years, the company aims at learning and adjusting itself in line with the social and cultural values of the country, while ensuring that technological advancements run smoothly. Qatar Deja Vu will operate in the consumer electronic industry in Qatar and deal in the manufacturing of smart devices which are specifically made for young generation. The upcoming product of the company is named as â€Å"Smart Pen†, which is also being developed for people falling in the young age group. This mission statement is a depiction of the comprehensive vision and long term strategy being followed by the company. As the company aims at targeting young generation, therefore the element of youth is everywhere in its vision, strategies and products. The plan to introduce a Smart Pen in Qatari market is also a part of its long-term strategy to remain committed to serve the Qatari youth with innovative products. The marketing research carried out and presented in this report has been based on information collected through secondary sources of information. In fact, there has been no primary information source or research instrument has been used in the research. The major sources of secondary information, used in this report, have come from online sources, such as websites, market reports, analysts’ opinions and forecasts, news, journals, books, magazines, etc. All information obtained from these

Biological Criminal Behavior Profile of Andrea Yates

Biological Criminal Behavior Profile of Andrea Yates Judy Mazzucca Dysfunctional behavior or anxiety are two illness that produce results in the cerebrum. Experiencing these behaviors can cause indefinitely change to an individual. They are able to implement unrealistic things in the mind like voices, distrustfulness and pipedreams. At times, individuals with these type of diseases begin harming themselves. In different cases, when that does not feel sufficiently, the individual then will swing to harming and in some cases executing other individuals. Andrea Yates is exceptionally outstanding for her horrendous wrongdoings against her youngsters. Mrs. Yates is somebody who profoundly experienced dysfunctional behavior (post birth anxiety and baby blues psychosis). These sorts of dysfunctional behavior ladies endure subsequent to bringing forth their children, they are intense diseases. It took psychiatric medication and people in general a considerable measure time to acknowledge how genuine it can get. The case of Andrea Yates conveyed a different insight to humanity. July 2, 1964, Andrea Yates was born in Houston Texas. Yates was an extremely timid yet splendid young woman. Andrea Yates moved on from her secondary school, Milby High, as valedictorian in the year 1982. At the point when Yates graduated, she went ahead to go to the University of Texas for their wellbeing and science program. After diligent work and devotion, Yates was so pleased with her reviews that she graduated and turned into an enrolled nurture. Shortly after moving on from school she wedded the man she had always wanted, Rusty Yates. Right after marriage, Yates found she was pregnant with their first child. The married couple were very happy about the news. Not far after the birth of their son Yates hinted at some minor baby blues. Inside the following five years Yates brought forth two other youngsters, the couple at the season of their third tyke were living in Florida in a 38-foot trailer, with next to no family bolster. They chose to move back home to Texas. When they gav e back, the family acquired a 350 ft. transport to live. A man let them know whether they proceeded with their corrupt ways their kids would smolder in hellfire. Yates acknowledged this, it stayed with her yet that did not prevent them from having more kids (AE.2012). In 1999 Yates and her significant other respected their fourth youngster, another kid into their effectively substantial family. Until this point, Yates was adapting to the misery which was minor yet being a homemaker of four youngsters, the worry of life was inflicting significant damage. A couple of months in the wake of brining home her fourth tyke Yates sank further into her post birth anxiety. Yates was so stressed and overlmed by June of 1999 that she considered the thought of taking her own life. After being in the hospital for seven days, Yates never admitted that she was emotionally unstable. Later sent home and provided with medicine to treat the post pregnancy anxiety, she noticed it was working well for her. Yates stopped the medication after the fourthteen day which made her wosen. Yates was fantasizing and unable to care for her small children. It was so critical that she started talking with the characters from television. In July, she begged her husband for him not to get in the way of her taking her own life as she held a knife on her neck. Corroded, her significant other, then conceded her to doctors facility again for a ten-day assessment. Having to follow up with her doctor, he noticed that Yates was not mentally stable. The doctor changed Yates medicines and she was able to go home to her family. As 1999 finished, Yates appeared to turning into the mother she needed and should have been. She was taking her meds, making the most of her kids and life appeared to be less distressing for her. As the year 2000 gets started, Yates comes to the surprise of being preganant with her fourth child. Her daughter was born in November of 2000. Back again into early 2001, Yates started to become hysterical. Yates doctor had to remove her from taking Haldol. Her doctor came to the conclusion that Yates was not in her right state of mind. The doctor thought that Yates was being affected for being a mother of several children. He essentially requesting that her concentrate on being solid and remain positive. This was simpler said than accomplished for Yates and nobody could foresee what this one activity would be trailed by. As 1999 finished, Yates appeared to turning into the mother she needed and expected to be. She was taking her meds, making the most of her youngsters and life appeared to be less unpleasant for her. Against her doctors will, Yates becomes pregnant with her fifth child. November 30, 2000 Yates and her husband bring a girl to this world. They are now pour boy and one girl, she tries hard to get comfortable with her life. In March 2001 Yates hit a hurricane and gradually began to winding wild, particularly after the demise her dad prior that month. Yates ran into talk with her therapist toward the finish of March of 2001 in the wake of talking with her he chose to take her off Haldol. Her therapist felt Yates was not in a long haul insane state, he recently felt that being a mother five was unpleasant now and again and life would improve for her. He basically requesting that her concentrate on being solid and remain positive. This was less demanding said than accomplished for Yates and nobody could anticipate what this one activity would be trailed by. In May of 2001 Yates came back to the clinic she was there for then days in light of the fact that into her stay Yates asserted that she was fine and that she simply expected to figure out how to deal with her life and stress better. Be that as it may, not long after her arrival home from this visit Yates started to self-hurt once more, quit conveying, declined to sustain her youngsters and had started to peruse the book of scriptures lavishly. Yates was persuaded that in the event that she didnt do what the voices were advising her to do that her youngsters would be sent to damnation for all endlessness. On June 20, 2001 Yates went into her lavatory feeling the tub with water while her youngsters played in the family room, nobody could envision the arrangements that were disentangling in Yates head as the voices squeezed her squeezed her. Yates wrapped up the tub and got the most youthful kid, her lone little girl first. From her she advanced from the most youthful to most establish ed holding every one under the water suffocating them. One by one Yates laid them on the quaint little inn mind she thought she had spared her youngsters from the doors of hellfire, to her in her mind they were currently blessed messengers, and they were spared. Yates spouse, Rusty, returned home later that night to make a horrifying disclosure he strolled in the space to discover every one of his youngsters laying their as though they were dozing yet upon him looking nearer he realized that they were no more. All Yates could state to him and the police was, the fiend said on the off chance that they lived and I didnt spare them he would take them to damnation to blaze, I spared them. Yates remained in a mental state week after the wrongdoing had happened, she demonstrated no feelings toward what she had done asserting that she was not a decent mother. She went ahead to state her children where terrible and that her youngsters were not growing effectively either. In the wake of being captured Yates needed to have a few specialists and therapists come into see her since she achieved a point where she would not nourish herself or deal with herself period. On the outside world thought Yates case was flooding the sensationalist newspapers and news, and the crazy piece of that was a considerable measure of mother felt for her and comprehended in light of her condition with post pregnancy anxiety and baby blues psychosis. Other however felt nauseated by the wrongdoing yet one thing was without a doubt Yates was not treated legitimately for her condition. Yates lawyers contended energetically and utilized the way that her specialists and specialists neglected to give her appropriate care for the most part as a result of protection issues yet none the less Yates was a ticking time bomb that needed legitimate prescription and treatment to help her with her issues. In 2002, Yates was sentenced to capital murder, sentenced to life in jail with conceivable parole once the forty years is finished. There was an annulment for Yates conviction in July 2006 because of proof her legal counselors spoke to on her mental state, Yates was then found not liable because of craziness. Not long after the decision Yates was transported to Vernon Texas mental office called North Texas State Hospital. Ideal on time in 2007, in any case, Yates was relocated again to another mental recuperating office in Kerriville, Texas as she posed not to be a hazard to staff or herself. Subsequent to examining and checking on this case one can be left with question toward the end, why did Andrea Yates carry out this awful wrongdoing? The appropriate response is dysfunctional behavior, this is a genuine condition regardless of what sort of emotional instability a man may have and it should be tended to and treated effectively. Dr. Gerald Harris, who is a clinical therapist, has talked with Yates on a few distinct events to attempt and comprehend why and furthermore analyze precisely what is new with her. On those visits Yates had expressed similar things that she has initially that the demon had been conversing with her, that she should have been rebuffed for not being a decent mother to her kids, and that her kids were terrible as a result of her and her decisions (Crime and Punishment.2012). Yates was experiencing baby blues psychosis, even after that could have formed into jumpy schizophrenia which adds to the voices and fantasies. The individual, as Yates, is not in tuned with reality and they cant understand what is genuine or separated of their creative energy. For Andrea Yates the demon, the voices and her inclination towards life and her kids where all genuine for her she couldnt characterize that line. On account of the times of research, which missed the mark for Yates in her time since we were still not as cutting edge with maladjustment even that short a period prior, we can now characterize prior phases of psychopathy. The main issue is they imitate a considerable measure of different things so most guardians dont get on until its past the point of no return when taking a gander at it prior on in an individuals life, these are ceaseless lying, taking and needing to begin battles. Yates obviously did not demonstrate any manifestations in early life it was not until after her third youngster that post birth anxiety and baby blues psychosis assumed control. At the point when a lady is encountering post pregnancy anxiety a lady will ex perience the manifestations of being jumpy, whimsical, and silly. Some lady dont understand that they are experiencing this and in some cases to not connect for help since they dont comprehend what is going on. Without treatment or help these manifestations can advance bringing about a lady to fantasize, do self-damage, or mischief others incorporating their youngsters however in their mind they dont understand they are doing anything incorrectly to them it feels right and alright. These are the side effects and feeling that Yates experienced, yet help was there is quite recently fizzled her. Maladjustment of any sort is a genuine condition and ought to dependably be dealt with so. References Crime and Punishment. (2012). Retrieved from  http://www.about.com/people/andrea_yates AE. (2012). Retrieved from  http://www.biography.com/people/andrea-yates-235801

Teens Shouldnt Diet Essay -- essays research papers

  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Why Teens Shouldn’t Diet   Ã‚  Ã‚  Ã‚  Ã‚  Dieting can be defined as restricting calories or food groups (Deal with Diets: kidshealth.org). With the number of obese people growing, it’s no wonder that people are starting to diet, and â€Å"in 1988, Americans spent 32 billion dollars on diets and diet products (Baird: Women’s Health Fact Sheet).† A problem arises when teens start restricting their food, because dieting can be very harmful to a teenager’s still-developing body. It can also be harmful to the teen’s psychological health as well. â€Å"80% of teen girls are unhappy with their bodies and weight (Community Action: 27% of Teens in Peril from Dieting), and 50% of teen girls incorrectly believe that they are overweight, increasing the likelihood that they will diet (Strauss 741).† Dieting comes with its own host of problems which is why teens should definitely not diet because it can cause obesity, eating disorders, and nutrient deficiencies.   Ã‚  Ã‚  Ã‚  Ã‚  Some people may be surprised by the fact that dieting can actually cause obesity later. It seems like a paradox, but it really isn’t. When someone else controls the way you eat, it’s very natural to rebel. Also, when someone diets, it slows down their metabolism, and when a person starts eating like they used to, the metabolism doesn’t have any time to adjust to that, and there is a weight gain. Plus, dieting lowers a person’s blood sugar, which can trigger depression, then trigger binge eating, which leads to weight gain (Drohan 30-32). This may all seem like theory, but there have been two recent studies to explore it further. Harvard Medical School put together a study, testing this theory, and the results were surprising. What they found after testing 8,203 girls and 6,769 boys was that the adolescents who dieted frequently actually gained more weight each year than other children. Both the males and females suffered from the boomer ang effect of dieting, and gained, on average, two pounds more than the non-dieters. They then determined that the weight gain was due to the fact that when teens diet, they are restricting themselves. When a person cuts down on calories, it becomes very hard for them to control the cravings, desires, and the hunger. When they can no longer control themselves, ... ...bsp;Overall, dieting can be very dangerous. It can lead to obesity, cause eating disorders, or be the source of nutrient deficiencies. Teens diet for a variety of reasons, but they really shouldn’t, because it really can be detrimental to their health. What teens need to realize now is that if they practice unhealthy eating now, they are setting themselves up for physical and mental problems late in life, which won’t help themselves or their loved ones. A teen needs to also identify the reasons why they are thinking of dieting anyway. Yes, it might be because they are obese, but many people incorrectly believe that they are overweight, and there are causes of that, which need to be addressed. Teens diet because they are on a quest for the perfect body, but they need to realize is that their perfect body may not match the body they see on the television or in magazines. Any teen who starves herself to become thin is only setting herself up for disaster. Teens just ne ed to try to accept themselves for who they are, and then everyone else will accept them also. They need to realize that it’s not worth their health to go on a quest for the perfect body that has been airbrushed anyway.

Pynchons Gravitys Rainbow Essay -- Pynchon Gravitys Rainbow Essays

Pynchon's Gravity's Rainbow    Thomas Ruggles Pynchon was born in 1937 in Glen's Cove, New York. He is the author of V., The Crying of Lot 49, Gravity's Rainbow, Slow Learner, Vineland, and Mason & Dixon. Nothing else is known of this author (not exactly true, but close enough to the truth to make that last blanket statement passable). He has attempted to veil himself in total obscurity and anonymity. For the most part, he has succeeded in this, save for a rare interview or two. In 1974 he received the National Book Award for Gravity's Rainbow. He would have been awarded The Pulitzer Prize as well, but his blatant disregard for narrative sequence led to a rift between the judges and the editorial board. Ultimately, the book was not selected. In fact, no book was chosen that year in the Fiction Category, the first (and only) time a work of fiction did not receive the award. The controversy that followed was considerable. Keeping this in mind, any attempt at an expurgated plot synopsis is laughable at be st, therefore will be somewhat refrained from. However, given the brevity of this paper, it is possible to address the setting(s), the chief protagonist, and some interpretations concerning the title of this book.    The setting is World War II, and England is being devastated by Hitler's revenge weapon, the V-2 rocket. In response to this, two organizations, ACHTUNG--Allied Clearing House, Technical Units, Northern Germany; and PISCES--Psychological Intelligence Schemes For Expediting Surrender, embark on a quest which will carry them across the world in order to find a solution for this dilemma. That's about as simple as it gets; a cursory analysis of this story is comparable to trying t... ...y) that pools all of these colors together. The colors could represent the varying aspects and cultures contained within the Human Race. The choices presented both in the title and in the story itself create a vast labyrinth, much in the way Borges conceives the workings of an elaborate universe.    This book is not for everyone. It is the most convoluted, non-linear, contradictory work of fiction I have ever encountered. It is also one of the most hysterical, challenging, harrowing, brilliant and beautiful. Pynchon clearly affirms Eliot's assertion that fiction and poetry must be difficult in order to capture the difficult modern world. Reading this work becomes a metaphor for examining life which exists on a disruptive continuum. From this book alone, Thomas Pynchon must be considered as one of the most important voices in 20th-Century literature.

Report on Erp Review at Sundram Fasteners Essay

The model needs one-time data entry which enables a fast and accurate processing of the data. SAP is based on three-tier client/server model. The anatomy of SAP R/3 is as follows, (1)SAP presentation server, (2)SAP application server and (3)SAP database server. Presentation server: The presentation server is actually a program named sapgui. exe. It is actually installed on a user’s workstation. To start it, the user double-clicks on an icon on the desktop or chooses a menu path. When started, the presentation server displays the R/3 menus within a window. This window is commonly known as the SAPGUI or the user interface. The interface accepts input from the user in the form of keystrokes, mouse clicks, and function keys, and sends these requests to the application server to be processed. The server sends the results back to the SAPGUI which then formats the output for display to the user. Application server: An application server is a set of executables that collectively interpret the ABAP/4 programs and manage the input and output for them. When an application server is started, these executables all start at the same time. When an application server is stopped, they all shut down together. The number of processes that start up when you bring up application server is defined in a single configuration file called the application server profile. Each application server has a profile that specifies its characteristics when it starts up and while it is running. For example, an application server profile specifies. ?Number of processes and their types. ?Amount of memory each process may use. ?Length of time a user is inactive before being automatically logged off. Database server: The database server is a set of executables that accept database requests from the application server. These requests are passed on to the RDBMS (relation database management system). The RDBMS sends the back to the database server, which then passes the information back to the application server. The application server in turn passes that information to your ABAP/4 program. There is usually a separate computer dedicated to house the database server, and the RDBMS may run on to computer also, or may be installed on its own computer. Defining an R/3 system: The simplest definition of an R/3 system is â€Å"one database†. In one R/3 system, there is only one database. To expand the definition, R/3 is considered to be all of the components attached to that one database. One R/3 system consists of one database server accessing a single database, one or more application server and one or more presentation servers. By definition, it is all of the components attached to one database. During an implementation, there is usually one system (or one database) assigned to development, one or more systems designated for testing and one assigned to production. The term R/3 system landscape denotes a description of the number of systems within an SAP installation and how they are designated, such as development, test, or production. The SOP tool (SAP sales and operations planning module) executes the planning procedure for sales, purchase, inventory and forecasts at different levels of production based on plant capacity, storage of materials etc. SOP data such as (1)Period units (days, months, years), (2)Characteristics (company code, plant, materials) and (3)Key figures (sales forecast, purchase and inventory) are contained in the information structure.

Gender role Essay

Gender role/expectation that exists in contemporary Japanese society Discuss one gender role or expectation that exists in contemporary Japanese society, please talk about: 1. how/why this role emerged and 2. provide examples of how men and/or women are changing and resisting/subverting this gender role/expectation. In Japan, traditional gender roles are characterised by a strong sense of patriarchy in society, this is a male dominated country with a distinct separation of gender roles. In the family, this refers to the idea that the man is a breadwinner and the woman is a homemaker. At the workplace, there is a strong male dominance in the company hierarchy. Generally, men have more career opportunities, often life-time job and good salary, and women are considered to be temporary employers, expected to stop working after the marriage or childbirth. Working women generally take on non leadership roles, so this reduces the possibility to climb on career steps. Childcare is regarded as the mother’s responsibility and the father’s domestic role is limited in helping to repair something and playing with children on weekends. Wives spend lot of time inside the house, and husbands – outside. Today this situation is a little bit changing, but still, remains the idea that man stands few steps higher than women, especially at work places and at government institutions. Gender roles and attitudes towards these roles among young generation’s couples are changing in a good way – men spend more time with their children, and women have more opportunities in their career, especially in international context. Young people, travelling abroad and then coming back to Japan begin to be more flexible and more elastic in this strict Asian country. They bring new waves, new feelings and new experiences, so it is natural, that little change towards the equality between man and woman is coming also. Then the old generation is less flexible than young Japanese people – attitudes are changing, but their behaviour is not. Nowadays, we can see optimistic alterations, for example, some sociologists claim that with the rising problems faced by the Japanese economy, there have been changes in the structured patterns of gender in both the family and the workplace. Economic recessions in this country have forced many women to enter the labour force in order to increase the level of income. With an increasing number of women in the labour force, the existing gender ratios have been altered favouring increased gender equality. Changes in the family can be seen in the presence of omiai, the traditional arranged marriage. Women are also marrying later, with the average age of first marriage at 28-29 years in 2005, compared to 25 years in 1983. For increasing equality between gender roles, the government began to pass legislation such as a Gender Equality Law, which aimed to set broad new principles for Japanese society. In addition, government legislation such as the Equal Employment Opportunity and Labour Standard Laws were set up to outlaw workplace discrimination and set up a definition for sexual harassment. These laws set the stage for a more equitable treatment of women and served as a positive step towards increased gender equality. (http://en. wikipedia. org/wiki/Japanese_law) Coming back to the discourse about marriage, in modern Japan, under the democratic constitution, marriage is supposed to be based on equal relations between man and woman. Polygamy is prohibited, and Japanese family is formed under the father as a head of household. The contemporary Japanese family, however, is changing rapidly because of lower birth rates, longer life expectancies, an increase in the number of one-person households, and later age at marriage. Globalisation and cheaper travelling has also positive transformations in gender roles and equality. As an example, I would like to tell about one young Japanese couple, I was living in their neighbourhood for 4 months. I have noticed that the wife is not subordinated under her husband, as I have read before in some articles about traditional relations between married couple. During my university classes I have read that traditionally husband and wife are expected to communicate as little as possible here in Japan. This situation is described as a domestic divorce. There is no conversation, communication and sexual relations between a husband and wife, but they do not divorce. Well, now I can say that not all the couples are like that. Wife’s and husband’s roles are changing in positive. This young couple, on my opinion, is really an ideal couple. They were dividing their house keeping roles without any dominating behaviour. I haven’t noticed more power on her or his behaviour. They were acting as a normal, equal couple. Of course, one gender role – mother’s role, is noticeable, and, I think, is still resisting in Japan. Being a good mother sometimes could be even more important than being a good wife or lover. The concept of motherhood in Japan has deep cultural and historical roots, and today’s women still believe in the power of caring their children as well as they can. Another role, man as the main breadwinner of the family, is also resisting. The perception of the man as a main householder is common also in the rest of world, especially in South European countries. On conclusion, we can see that young Japanese families are changing apparently. Men are more and more present in domestic activities and women are more and more able to combine work and house-keeping together. I am sure that now, in the 21st century, the Japanese family is becoming on gender-equality based family! 2 FOLLOWING QUESTIONS Depiction of gender in the Japanese media (advertising/ TV commercials) Researchers and sociologists recently are talking a lot about that the stereotypic portrayals of men and women found in mass media reinforce gender stereotypes in Japanese society. A limited literature and research on Japanese media suggests that gender stereotypes may be present in Japan. Theoretically, we can argue about the existence or not, but practically, it’s true. Stereotypes exist, and fairly strong, especially during the after war period and the past three decades. We can see it on TV, magazines and newspapers. Media is a reflection of mass culture. So it’s normal to see these stereotypes depicted in media. Over the past decade gender stereotyping in television commercials has received particular attention. Some studies have reported either modest (Schneider & Schneider, 1979) or substantial decrements (Bretl and Cantor, 1988; Ferrente et al. , 1988) in stereotyping while others have found no significant changes in the portrayals of men and women over time (Lovdal, 1989; Maklin & Kolbe 1984). Of course, there is always big difference between woman and man, their role in society, work and family has different meanings and different approaches. For example, „boys are encouraged to be aggressive, become leaders, engage in sports, and grow into ‘macho’ men. Research by Sobieraj, 1998 (Children Now, Images of Men and Boys in Advertising, Spring, 2000), found in advertising for toys that these showed boys as â€Å"strong, independent, athletic, in control of their environments, adventurous, and aggressive. Girls are shown as giggling, gentle, affectionate, fixated on their physical appearance, and extremely well behaved. a (http://www. directessays. com/viewpaper/79101. html) I have watched some advertisements in TV, and noticed that women in these commercials are more likely to be young, beautiful, dependents, in the home and users of the products. They also are recommending some products without specific explanation how to use it or without the support of factual arguments (Men are better in to weigh in with an argument, I think). Men, on the other hand, are older, often â€Å"salarymen†, somewhere outside of the home and authorities on the products. They are also often explaining why the products are good and recommending items soundly. Even though some stereotypes about the presentation of gender in commercials persist (for setting, product type, voice-over), the recent study found an equal number of males and females appearing as primary characters in commercials during prime time. („Changing Gender Roles in Prime-Time Commercials in Malaysia, Japan, Taiwan, and the United Statesa, Mary Jiang Bresnahan, Yasuhiro Inoue, Wen Ying Liu and Tsukasa Nishida). Talking about gender stereotypes in Japanese media, maybe somebody would talk about women position and how this position is objectified. Of course, Japanese women in past few decades felt discriminated politically and economically. This unsafeness made them feel weaker, and maybe unappreciated. But we can also see it from the opposite side. We can think about how men are objectified. Especially, how the male ideal in Japanese media is becoming closer and closer to a woman (as I have mentioned about it in past sociology papers). Recent studies talk about some changes of stereotypic portrayals of men and women and also are investigating changes in gender stereotyping over time. As example, in one online magazine we can find that „although some indigenous gender stereotyping was evident, several traits previously associated with Japanese women (devoted, obliging, rattle-brained, superstitious) were associated with men. Also, men were not linked with certain stereotypical male traits (autocratic, blustery, forgiving, generous, and severe). (http://www. jstor. org/pss/4189063). Other findings included women being shown in a positive way as often as men. This means that women are represented almost in the same way as men, for example, if advertisement is promoting a high-price product, there is an equal number of man and women shown in commercials. Otherwise, it is evident that gender, sex and advertising are „workinga for only one purpose- to make people desire specific product and to buy it.